Wire Hide Thank you for selecting our product to enhance your home!

Wire Hide Low Voltage Wire Cover Kit- 2 or 3 Kits per Door

$8.79

Kit includes 1 wall plate, 22" of tubing, and one hardware packet.

Use three kits per door. Two for the photo eye sensors. One for the ceiling.

If extra tubing is ordered, the stock 22 inches of tubing will be added to the length of bulk tubing ordered. We want to support you with all the materials you need to do the job efficiently with minimal waste and time.

Shop

Sensor Shield Photo Eye Bracket Set-Completes 1 Door

$58.99

Sensor Shield is a heavy duty, steel bodied photo eye mount that accepts nearly all brands of garage door photo eyes.

This product was styled:

• First for functionality.
• To provide the cleanest finish available on the market.
• To provide a solar shield to block direct sunlight and prevent false signals.

One set includes:

2 Steel Sensor Mounting Tubes

2 Foam Photo Eye Inserts

Shop

Here are some ordering tips. For most doors, customers tend to order 2 Wire Hide wall plates kits and 1 set of Sensor Shields. The Wire Hide kits are sold as singles as you can use a third kit to hide the wires coming from the ceiling back down to the opener head unit. This is where the oversized kit comes into play as the larger 3/8" ID tubing easily allows 3 control wires to be routed down to the opener head unit.  A standard Wire Hide kit can be used in this case but the sensor wires need to be spliced behind the wall plate so that only two control wires pass down to the opener head unit. 

Example: If you are using a jack shaft wall mount opener, these use 4 Wire Hide kits, 1 oversized kit, and 1 Sensor Shield set: 1 wall plate per photo eye sensor, 1 wall plate for the cable alignment sensor, 1 wall plate for the lock solenoid, 1 oversized kit for cables coming back to the opener head unit, and 1 set of Sensor Shields to mount the two photo eye sensors.
​​

Additional Wire Hide Tubing

$0.86 - $1.56

Use this when your wall plate and wire destination are far apart: great for a tall ceiling or long wire runs.

Standard Wire Hide product is 1/4 inch inside diameter, temperature, and UV stable.

Over sized Wire Hide tubing is 3/8" inside diameter tubing.

Enter the desired length in feet in the quantity box below.

Shop

Over Sized Wire Hide Low Voltage Wire Cover Kit

$9.76

Kit includes one wall plate, screws, anchors, and 22 inches of 3/8" inside diameter tubing. The wall plate is identical to the standard Wire Hide wall plate except that the tubing is 3/8" ID verses the standard 1/4" ID

Use this over sized kit for feeding the 3 wires down from the ceiling to the opener head unit or for audio visual wiring, speaker wiring, or any other low voltage need.

Note: these are not intended to be used on photo eye installations and do not fit into the mounting hole on the Sensor shield brackets as the single control wire for each photo eye sensor fits comfortably in the standard 1/4" ID tubing of the standard Wire Hide kit.

Shop

 All orders include free shipping and payment is secured through Square. 
​
To our Canadian customers, we know the pain of the customs fees at the border. We are working on minimizing these costs to keep you supported. 

Thank you for the out flow of support! Tell our story to your friends and neighbors.

Voted Best New Garage Door Accessory -View More

The Before and After Says It All...
Contact us to hear how we can help you today.